Dubbing Still Images Recorded On ATape To A Memory Card

Still images can be dubbed from a tape to a memory card.

1 Load a memory card ( pg. 11) and cassette ( pg. 9).

2 Set the VIDEO/MEMORY Switch t to “VIDEO”,

then set the Power Switch @ to “” while pressing down the Lock Button $.

3 Press MENU 4. The Menu Screen appears. Press +

or – 5 to select “ VIDEO” and press SELECT/SET

3.

4 Press + or – 5 to select “ COPY” and press SELECT/SET 3. The Sub Menu appears. Press

+or – 5 to select “ON” and press SELECT/SET 3. Selection is complete.

5 Press + or – 5 to select “ RETURN” and press SELECT/SET 3 twice. The normal playback screen reappears.

6 To select a video image to be dubbed, start playback by pressing 4/6!. At the moment you find the image you wish to dub, press it again to engage Still Playback.

7 To start dubbing, press SNAPSHOT 9. The selected image is stored on the memory card.

•“” blinks during dubbing.

NOTES:

●If SNAPSHOT 9 is pressed in step 7 when a memory card is not loaded, the message “COPYING FAILED” is displayed.

●To change the Snapshot mode for dubbing,  pg. 29.

●If an image recorded on the tape using the WIDE mode

( pg. 33) is dubbed to a memory card, the WIDE mode identifying signal is not dubbed with it.

●To use Playback Special Effects with a video image you

wish to dub, perform up to step 7 using the remote control ( pg. 39).

●Images are dubbed in 640 x 480 pixels.

 

Display

V I DEO

6

COPY – OFF

ON

Menu Screen

Setting Print Information(DPOF Setting)

This camcorder is compatible with the DPOF (Digital Print Order Format) standard in order to support future systems such as automatic printing, which records information about the still images you wish to print (such as the number of prints to make). There are 2 print information settings available: “TO PRINT ALL STILL IMAGES (ONE PRINT FOR EACH)” explained below and “TO PRINT BY SELECTING STILL IMAGES AND NO. OF PRINTS”.

TO PRINT ALL STILL IMAGES (ONE PRINT FOR EACH)

1 Set the VIDEO/MEMORY switch t to “MEMORY”,

then set the Power Switch @ to “ ”, while pressing down the Lock Button $ located on the switch.

•Make sure an IMAGE file is displayed ( pg. 18, “Normal Playback”).

2 Press MENU 4. The Menu Screen appears.

3 Press + or – 5 to select “DPOF” and press SELECT/SET 3. The Sub Menu appears.

4 Press + or – 5 to select “ALL 1” and press SELECT/SET 3. Selection is complete. The DPOF Screen appears.

5 Press + or – 5 to select “EXECUTE” and press SELECT/SET 3. The normal playback screen appears.

•To cancel selection, press + or – 5 to select “RETURN” and press SELECT/SET 3.

To Reset The Setting . . .

..... select “RESET” in step 4. The setting is reset to 0

for all still images.

TO PRINT BY SELECTING STILL IMAGES AND NO. OF PRINTS

1 Perform steps 1 through 3 of “TO PRINT ALL STILL IMAGES (ONE PRINT FOR EACH)”.

2 Press + or – 5 to select “CURRENT” and press SELECT/SET 3. Selection is complete. The DPOF Screen appears.

3 Turn the SHUTTLE SEARCH Ring # counterclockwise (2) or clockwise (3) so that the image you wish to print appears.

4 Press + or – 5 to move the highlight bar to the SHEETS number indication and press SELECT/SET

3.

Continued on next page.

EN

ADVANCED FEATURES 23