6
VQT4G74 (ENG)
Attaching/Detaching the Lens≥Refer also to the camera’s owner’s manual for
attaching and detaching the lens.
∫Attaching the Lens
≥Check that the camera is turned off.
1 Turn the lens rear cap
to detach it.
A: Lens Rear Cap
2 Align the lens fitting
marks B (red marks) on
the camera body and the
lens and then rotate the
lens in the direction of
the arrow until it clicks.
•Do not press the lens release
button C when you attach a lens.
•Do not try to attach the lens when holding it at an
angle to the camera body as the lens mount may
get scratched.
•Check that the lens is attached correctly.
∫Detaching the Lens
≥Check that the camera is turned off.
While pressing on the
lens release button D,
rotate the lens toward
the arrow until it stops
and then remove.
•Attach the lens rear cap so
that the lens contact point does not get
scratched.
•Attach the body cap to the camer a so no dirt or
dust will get inside the main unit.
∫Attaching and Detaching the Lens Cap
Pinch the lens cap
as shown in the
figure to attach or
detach.
•Be careful not to lose
the lens cap.
VQT4G74_ENG_SPA.book 6 ページ ２０１２年９月４日 火曜日 午後６時２７分