About the AC adaptor

If the temperature of the battery is extremely high or extremely low, charging may take time or the battery may not be charged.

If you use the AC adaptor near a radio, radio reception may be disturbed. Keep the AC adaptor 1 m or more away from the radio.

When using the AC adaptor, it may generate whirring sounds. However, this is normal.

After use, be sure to disconnect the AC adaptor. (If it is left connected, a minute amount of current is consumed.)

Always keep the electrodes of the AC adaptor and battery clean.

About status indicator during charging

When the status indicator is flashing at a particularly fast or slow rate, the following should be considered.

Flashing with approx. 4 second period (off for approx. 2 seconds, on for approx.

2 seconds):

When the battery is over discharged or the temperature of the battery is too high or low. It can be charged, but it may take a few hours to complete the charging normally.

It will flash in approx. 2 second intervals when normal charging resumes. Even in such cases, it may start flashing in approx. 4 second intervals until charging is completed depending on the conditions of use.

Flashing with approx. 0.5 second period (off for approx. 0.25 second, on for approx. 0.25 second):

The battery is not charged. Remove the battery from the unit, and try charging again.

Check that the terminals of the unit or battery are not dirty or covered with a foreign object, and connect the battery correctly once again. If a foreign object or dirt is present, turn off the unit before removing.

The battery or environment is at an extremely high or low temperature. Wait until the temperature has returned to an appropriate level and try charging again. If you are still unable to charge, there may be a fault in the unit, battery or AC adaptor.

Off:

Charging has finished.

If the status indicator stays off despite the charging being unfinished, there may be a fault in the unit, battery or AC adaptor.

Refer to page 84 for details on the battery.

- 85 -

Page 85
Image 85
Panasonic HC-V10 operating instructions About the AC adaptor, About status indicator during charging, Seconds

HC-V10 specifications

The Panasonic HC-V10, HC-V11M, HC-V10K, and HC-V10M are compact and versatile camcorders designed to deliver high-quality video recording while maintaining user-friendly features. These models cater to both amateur videographers and more experienced users seeking a reliable device for capturing precious moments.

One of the standout features of these camcorders is their 70x intelligent zoom, which allows for detailed close-up shots without compromising image quality. This feature is especially useful for capturing distant subjects during family events or nature outings. Additionally, the 28mm wide-angle lens enables a broader field of view, making it easier to shoot in tight spaces or group settings.

The HC-V10 series is equipped with a 1/5.8-inch BSI sensor that enhances low-light performance, ensuring that recordings remain clear and vibrant even in challenging lighting conditions. The built-in optical image stabilization (OIS) technology minimizes the effects of camera shake, producing smooth and stable footage. This is particularly beneficial for handheld shooting, where unwanted movement can detract from the overall quality of the video.

Recording in Full HD 1080p, these camcorders ensure that every detail is captured with clarity. The models also support AVCHD and MP4 formats, providing users with flexible options for playback and sharing. The intuitive touchscreen interface simplifies navigation and settings adjustments, allowing users to focus on capturing their moments without getting bogged down by complex controls.

Another notable feature is the integrated Wi-Fi capability in models like the HC-V11M, which allows for effortless sharing of videos and photos to smartphones and tablets. This connectivity option also facilitates remote control via a mobile app, providing even greater flexibility in capturing shots from various angles.

The HC-V10, HC-V11M, HC-V10K, and HC-V10M are designed with portability in mind, featuring a lightweight and compact body that fits easily into bags or pockets. This ensures that users can take their camcorder on the go without the burden of heavy equipment.

In conclusion, the Panasonic HC-V10 series combines advanced features, smart technologies, and user-friendly characteristics, making them an excellent choice for anyone looking to capture high-quality video with ease. Whether it’s for documenting family gatherings, travel adventures, or creative projects, these camcorders offer the versatility and performance needed to meet a wide range of videography needs.