107
VQT3Y04
If AVCHD scenes do not change smoothly
The images may be still for several seconds at the joins between the scenes if the following
operations are performed when multiple scenes have been continuously played back using
another unit.
Just how smoothly the scenes will be played back depends on the playback unit.
Depending on the unit used, the images may stop moving and become still for a moment
even when none of the following conditions are applicable.
A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at
every 4 GB of data when played back with another device.
It may not play back smoothly when the editing of scenes was done with the HD Writer LE
1.1, but it will play back smoothly if you set the seamless settings in the HD Writer LE 1.1.
Refer to the operating instructions for the HDWriter LE 1.1.
Principal reasons for not playing back smoothly
When the scenes were recorded on different dates
When scenes lasting under 3 seconds have been recorded
When PRE-REC was used for recording
When deleting scenes
When selected scenes are copied from the built-in memory to an SD card
When scenes recorded more than 99scenes on the same date
HC-V100&V100MP_PC_PU_VQT3Y04_mst.book 107 ページ 2012年1月5日 木曜日 午前10時20分