Panasonic HC-V100 owner manual 104, Environment TOO

Models: HC-V100

1 132
Download 132 pages 55.42 Kb
Page 104
Image 104

 

Indication

Problem

Check points

Remaining battery

≥ The remaining battery capacity indication is an

indication is not

approximation.

displayed properly.

If the remaining battery capacity indication is not

 

displayed correctly, fully charge the battery, discharge it

 

and then charge it again.

 

 

The remaining time

≥ [DISPLAY] of the [SETUP] is [OFF]. (l 40)

indication or the elapsed

 

time indication is not

 

shown.

 

 

Recording

 

Problem

Check points

 

The unit arbitrarily stops ≥ Use an SD card that can be used for motion picture

recording.

recording. (l24)

 

 

≥ The recordable time may have shortened due to the

 

deterioration of the data writing speed or repeated

 

recording and deletion. Using the unit, format the SD card

 

or built-in memory. (l 44)

 

 

≥ If [AGS] is [ON], record in the normal horizontal position

 

or set [AGS] to [OFF]. (l55)

 

 

 

 

 

 

Auto Focus function

≥ Switch to Intelligent Auto Mode.

 

does not work.

≥ If you are trying to record a scene that is hard to bring into

 

focus in Auto Focus Mode, use the Manual Focus Mode

 

to adjust the focus. (l 35, 62)

 

 

 

 

 

“ENVIRONMENT TOO

≥ Before turning on the unit, open the lens cover.

DARK, OR LENS COVER ≥ This message may also be displayed when recording in a

CLOSED.” is displayed.

very dark location.

 

 

 

 

Color balance of images ≥ In a place with multiple light sources, such as a

is strange when

gymnasium or a hall, set the White Balance setting to

recording in a place

(Indoor mode 2). If you cannot record clearly with the

such as a gymnasium.

(Indoor mode 2), set it to

 

 

(Manual adjustment

 

 

mode). (l 59)

 

 

 

 

 

Color or brightness of

≥ Color or brightness of the image may change, or you may

the image changes, or

see horizontal bars in the image when the object is

you may see horizontal

recorded under fluorescent light, mercury light or sodium

bars in the image.

light, etc., but this is not a malfunction.

Record in Intelligent Auto Mode or set the shutter speed

The LCD monitor flickers to 1/60 in areas where the power supply frequency is

indoors.

60 Hz, or 1/100 in areas of 50 Hz.

104

VQT3Y04

Page 104
Image 104
Panasonic HC-V100 owner manual 104, Environment TOO