- 50 -
Manual shutter speed/iris adjustment
Shutter Speed:
Adjust it when recording fast-moving subjects.
Iris:
Adjust it when the screen is too bright or too dark.
≥Press the iA/MANUAL button to switch to Manual Mode. (l48)
1Select [SHTR] or [IRIS] using the cursor button.
2Press 2/1 to adjust settings.
A: Shutter speed:
1/50 to 1/8000
≥If [AUTO SLOW SHTR] is set to [ON], the
shutter speed will be set between 1/25 and
1/8000.
≥The shutter speed closer to 1/8000 is faster.
B: Iris/Gain value:
CLOSE
!#
(F16 to F2.0)
!#
OPEN
!#
(0dB to 18dB)
≥Value closer to CLOSE darken the image.
≥Value closer to 18dB brighten the image.
≥When the iris value is adj usted to brighter than OPEN, i t changes to the gain value.
≥To return to auto setting, press the iA/MANUAL button.
≥When setting both the shutter speed and the iris/gain value, set the shutter speed and then
set the iris/gain value.
Manual shutter speed adjustment
≥You may see a band of light around an object that is shining very bright, or highly reflective.
≥During normal playback, image movement may not look smooth.
≥If you record an extremely bright object or record under indoor lighting, colour and screen
brightness may change or a horizontal line may appear on the screen. In this case, record
in the Intelligent Auto Mode or set the shutter speed to 1/100 in areas where the power
supply frequency is 50Hz, or 1/125 in areas of 60 Hz.
Manual iris/gain adjustment
≥If the gain value is increased, the noise on the screen increases.
≥Depending on the zoom magnification, there are iris values that are not displayed.
ᧂ
OPENOPEN
1/100100
BACKBACKBACK
IRISIRISIRISIRISIRISIRIS