[ECONOMY (AC)] | [ON]/[OFF] |
When about 30 minutes have passed without any operation while connecting AC adaptor with this unit, this unit automatically turns off.
≥This unit will not automatically turn off even if the [ECONOMY (AC)] is set to [ON] in following cases:
jUsing the USB cable for PC etc.
jDuring playback of the slide show
[QUICK START] | [ON]/[OFF] |
This unit is put into recording pause approx. 0.8 seconds after the LCD monitor is reopened.
≥When in Quick Start Standby Mode about 60% of the power used in Recording pause mode is being consumed, so the recording time will be reduced.
≥ 
Quick Start will not work if there is no SD card inserted.
≥ 
/ 
Quick Start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there is no SD card inserted.
≥The LCD monitor cannot be closed when using the USB cable, so please disconnect it from the unit.
≥Change the mode to 
.
1Set [QUICK START] to [ON].
2Close the LCD monitor.
The status indicator A flashes green and the unit goes into Quick Start Standby Mode.
3 Open the LCD monitor.
The status indicator A lights red and the unit is put into recording pause.
≥Quick Start Standby Mode is canceled if jabout 5 minutes have elapsed
jmode is set to 
≥It may take some time for Automatic White Balance to adjust.
≥In the Quick Start Mode, the zoom magnification becomes approx. 1k.
≥When it has gone into Quick Start Standby Mode automatically with the [ECONOMY (BATT)] (l 42)/[ECONOMY (AC)], close the LCD monitor once and open it again.
≥Turn the unit off using the power button.
43
