Hand Held Products 3220, 3060 Operation Control, Trigger Mode, Buzzer Tone, Scanning Tolerance

Programming the Scanner

Operation Control

♦ Trigger Mode, Buzzer Tone, Scanning Tolerance ♦

PROGRAM			END(Exit)
Family Code Selection	Parameter Selection		Option Code
Operation Mode	Low Power mode (Low Power triggering)	0
	Manual trigger (External triggering)	1
	Level mode (Auto power off)	2
	Alternative mode (Periodic power off)	3
	Presentation mode (Pulse driven reading)	4
	Auto trigger mode (Continued power on)	5
	Toggle mode (Repeat reading)	6
	Diagnostic mode (Test reading)	7
Buzzer Tone Adjust	Buzzer tone - mute	0
	Buzzer tone - low	1
	Buzzer tone - medium		2
	Buzzer tone - high		3
	Buzzer tone - extremely high		4
	Good-read beep before data transmission	5
	Good-read beep after data transmission	6
	Power-on beep		7
	No power-on beep		8
Scanning Tolerance	Regular (standard) printing quality	0
	Poor (critical) printing quality	1
	Please read the Scanning Tolerance information on page 3-28 before attempting to
(Printing Quality Control)	program this feature.
FACTORY DEFAULT

3-29