Version 1.0 - 9/26/2008

The Four SET modes are:

Set Mode 1 – Set LCD Contrast (1-8)

ƒPress and Hold the “SET” Key until the Wireless Display beeps to enter the SET mode

ƒ“CONTRST” and number (1-8) will display on the bottom of the LCD

ƒPress the “VOLUME +” Key to update the LCD Contrast settings.

Lightest Contrast = “1”, Darkest Contrast = “8”

ƒPress the “SET” Key to save the current settings and advance to the next option

ƒPress the “SET” Key to save the current settings and advance to the next option

Set Mode 2 - Set Text Scrolling Speed (1-3)

ƒPress the “SET” Key until “Scr” flashes at the top and “SET SCROLL SPEED” scrolls across the bottom

ƒThe standard speed is set to “2”

ƒThere are four speeds available – “1” is the slowest and “4” is the fastest

ƒPress the “VOLUME +” Key to change the scroll speed.

ƒPress the “SET” Key to save the current settings and advance to the next option

Set Mode 3 – Factory Reset of Wireless Display

NOTE: It is not possible to re-register a previously registered Wireless Display under a new account until the Wireless Display has been deleted from the user account on www.weatherdirect.com and a Factory Reset has been performed.

NOTE: Expansion Options that are Lifetime Upgrades are still active on your Wireless Display even if you delete it from your user account on www.weatherdirect.com or perform a Factory Reset. The selection of locations and other custom settings will need to be performed again if the Wireless Display is re-registered.

WARNING: The Factory Reset procedure will erase any registration and setup information from your Wireless Display. You must register the Wireless Display again with www.weatherdirect.com to use it after a Factory Reset.

Page 21 of 31

Page 21
Image 21
La Crosse Technology WA-1240U owner manual Four SET modes are Set Mode 1 Set LCD Contrast