Hand Held Products 3080, 3060, 3220 manual Code ID Transmission and Symbology Enable

Programming the Scanner

Symbology Programming

♦ Code ID Transmission and Symbology Enable ♦

PROGRAM		END(Exit)
Family Code Selection	Parameter Selection	Option Code
Code ID Transmission	Disable symbology ID transmission	0
	Enable prefix symbology ID transmission	1
	Enable suffix symbology ID transmission	2
	Enable both prefix and suffix symbology ID transmission	3
Symbology Enable	Automatic discrimination	00
	Code 128, UCC/EAN-128	01
	UPC-A	02
	UPC-E	03
	EAN/CAN/JAN-13	04
	EAN/CAN/JAN-8	05
	Codabar/NW-7	06
	Code 39/Code 32, HIBC	07
	Code 2 of 5 Family, IATA	08
	Code 93	09
Remember to scan “FIN” to terminate
	Code 11	10
this selection. But if you select the
	MSI/Plessey	11
“Automatic discrimination”, scanner
will terminate this selection	UK/Plessey	12
automatically.	Telepen	13

FACTORY DEFAULT

If your application is reading known, limited bar code symbologies, you may increase the reading speed and decrease the reading error possibility by enabling those known symbologies only. Furthermore, to add the “Symbology ID” into the transmitted data is also helpful for applications to identify the specific symbology ID. For example, to enable UPC-A and Code 39, only scan the following bar codes: “PROGRAM,” “Symbology Enable,” “0,” “2,” “0,” “7,” “FIN” and “END.”

To further ensure fast, accurate readings, you can complete more complex configurations via full-feature the Data Editor. To configure the full-feature the Data Editor, you must use the HHP SET, a Windows® 95/98/NT based software utility specially designed for the scanner.

3-12