Hand Held Products 3080, 3060, 3220 manual USB Keyboard Interface Connection

Terminal Interfaces

USB Keyboard Interface

The USB interface is one of the common standard peripheral interfaces for today’s computer system working under Windows® 98 and Windows® 2000 or above.

Scanning the following bar code will program for the USB interface.

USB Keyboard Interface

Main Cable To Computer USB Port

USB Keyboard Interface Connection

Make sure your computer has a USB port and the operating system is Windows® 98, Windows NT® 5.0, and Windows® 2000 or above.

Plug the RJ45 phone plug of the scanner main cable into the USB keyboard cable converter.

Plug the 4-pin USB Type A connector into the desired USB port of your computer. You will hear the power-on beep twice to signal that the power-on routine of the scanner is completed.

Whenever the scanner’s USB interface scanner is connected to any computer system for the first time, a string of “USB Manufacturer ID” messages will display to register the scanner into the operating system.

Please scan the “USB Keyboard Interface” bar code to configure the scanner into USB keyboard interface mode. The scanner is now ready to use.

2-4