14
VQT4R14
The unit can record still pictures or motion pictures to an SD card or built-in memory. To record to an
SD card, read the following.

Cards that you can use with this unit

Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating fo r motion
picture recording.
≥Keep the Memory Card out of reach of children to prevent swallowing.

Inserting/removing an SD card

When using an SD card not from Panasonic, or one previously used on other equipment, for the first
time on this unit, format the SD card. (l22) When the SD ca rd is formatted, all of the recorded data
is deleted. Once the data is deleted, it cannot be restor ed.
Caution:
Check that the access lamp has gone off.
Preparation
Recording to a card
Please confirm the latest information about SD Memory Cards/SDHC Memory Cards/SDXC
Memory Cards that can be used for motion picture reco rding on the following website.
http://panasonic.jp/support/global/cs/e_cam
(This website is in English only.)
1Open the SD card cover and insert (remove) the SD card into (from) the
card slot.
≥Face the label side B in the direction shown in the illustration and press it straight in as far as
it will go.
≥Press the center of the SD card and then pull it straight out.
2Press the C part of the SD card cover and close the SD
card cover.
≥Securely close it until it clicks.
Access lamp [ACCESS] A
≥When this unit is accessing the
SD card or built-in memory, the
access lamp lights up.
HC-X920&X920M&X910P&PC&PU_VQT4R14_mst.book 14 ページ ２０１２年１２月２７日　木曜日　午前１０時４４分