Indication

Problem

Check points

Remaining battery

≥ The remaining battery capacity indication is an

indication is not

approximation.

displayed properly.

If the remaining battery capacity indication is not

 

displayed correctly, fully charge the battery, discharge it

 

and then charge it again.

 

 

 

Recording

 

Problem

Check points

The unit arbitrarily stops ≥ Use an SD card that can be used for motion picture

recording.

recording. (l 13)

 

 

≥ The recordable time may have shortened due to the

 

deterioration of the data writing speed or repeated

 

recording and deletion. Using the unit, format the SD

 

card, built-in memory or HDD. (l 35, 36)

 

≥ If [AGS] is [ON], record in the normal horizontal position

 

or set [AGS] to [OFF]. (l 56)

 

 

≥

 

 

If the unit is exposed to strong vibrations or shocks while

 

recording on HDD, recording may stop to protect the

 

HDD. If the unit is used in a place with loud sounds, the

 

recording may stop due to sound vibrations. Recording

 

data on an SD card is recommended in these places.

 

 

 

 

Auto focus function

≥ Switch to intelligent auto mode.

does not work.

≥ If you are trying to record a scene which is hard to bring

 

into focus in auto focus mode, use the manual focus

 

mode to adjust the focus. (l 26, 66)

 

 

 

 

Colour balance of

≥ In a place with multiple light sources, such as a

images is strange when

gymnasium or a hall, set the white balance setting to

recording in a place

(Indoor mode 2). If you cannot record clearly with the

such as a gymnasium.

(Indoor mode 2), set it to

 

 

(Manual adjustment mode).

 

 

(l 64)

 

Colour or brightness of ≥ Colour or brightness of the image may change, or you

the image changes, or may see horizontal bars in the image when the object is

you may see horizontal recorded under fluorescent light, mercury light or sodium

bars in the image.light, etc., but this is not a malfunction.

≥In motion picture recording mode, record in intelligent

The LCD monitor flickers auto mode or set the shutter speed to 1/100 in areas

indoors.

where the power supply frequency is 50 Hz, or 1/125 in

 

areas of 60 Hz.

 

≥ In still picture recording mode, this will not affect the

 

recorded image.

- 122 -