[RELAY REC]

It is possible to continuously record motion picture to an SD card when there is no space available in the built-in memory. (It allows you to record only to SD card from built-in memory.)

≥Set [MEDIA SELECT] to [Built-inMemory].≥Set [REC MODE] to [HA], [HG], [HX] or [HE]. (l 51)≥Insert an SD card.MENU : [RECORD SETUP] # [RELAY REC] # [ON]

≥ is displayed on the screen. will disappear when space in the built-in memory is gone and the recording to the SD card starts.

≥Relay recording can only be performed once.

≥Combine the scenes that were relay recorded using the [RELAY SCENE COMBINE] into the SD card. (l 82, 90)

≥Once you have performed [RELAY SCENE COMBINE], you can use the relay recording function again. If the [RELAY REC] is set to [ON] without performing the [RELAY SCENE COMBINE], a message is displayed. You will be able to perform relay recording by touching [YES], but you will not be able to perform the [RELAY SCENE COMBINE] after that.

≥Still pictures are recorded to the SD card after relay recording.

≥ is displayed on the thumbnail display during the playback of the scene that was relay recorded on the built-in memory.

[FACE RECOG.]

Face recognition is a function for finding faces that resemble faces which have already been registered and automatically prioritising focus and exposure for those faces. This function makes it possible to keep the face of your loved ones in focus even when they are at the back or on the end of a line in a group picture.

MENU : [RECORD SETUP] # [FACE RECOG.] # desired setting

[OFF]:

Cancel the setting

 

 

[ON]:The face recognition function is available

[SET]:Face recognition registration/editing/cancellation

- 52 -