Panasonic HDC-SD40, HDC-TM40 Setting date and time, (l 29):, ¬Change the mode to, : [SETUP] # [CLOCK SET], 3 Press the ENTER button, 1 Select the menu. (l 28)

Preparation

Setting date and time

When the unit is turned on for the first time, a message asking you to set the date and time will appear.

Select [YES] and perform steps 2 to 3 below to set the date and time.

¬Change the mode to .1 Select the menu. (l 28) : [SETUP] # [CLOCK SET]2 Select the date or time using 2/1 and set the desired value using 3/4.ADisplaying the World time setting(l 29):

[HOME]/ [DESTINATION]

≥The year can be set between 2000 and

2039.

≥The 24-hour system is used to display the time.

3 Press the ENTER button.

≥A message prompting for World time setting may be displayed. Perform the World time setting by pressing the ENTER button. (l 29)

≥Press the MENU button to complete the setting.

≥The date and time function is driven by a built-in lithium battery.

≥When this unit is purchased, the clock is set. If the time display becomes [- -], the built-in lithium battery needs to be charged. To recharge the built-in lithium battery, connect the AC adaptor or attach the battery to this unit. Leave the unit as it is for approx. 24 hours and the battery will maintain the date and time for approx. 4 months. (The battery is still being recharged even if the unit is off.)

- 17 -