102 VQT4F46
The detected face is displayed in the frame.
∫About prioritized face framing
The prioritized face frame is displayed in
yellow. When the unit is set to Portrait mode
in Intelligent Auto Mode, the unit will focus
on the prioritized face frame and adjust the
brightness accordingly.
≥The gray frames are for face detection only.
≥When you press the button halfway while recording still pictures,
the unit focuses on the prioritized frame. When focus is achieved, the
prioritized frame turns green.
≥A maximum of 15 frames are detected, with the frames near the center
of the screen and large frames being prioritized.
≥For still pictures with detected faces, is displayed on the 1-file
thumbnail display. (l66)
≥If the subject is small or dark on the LCD monitor, the unit may not be
able to detect it.
≥[SCENE MODE] will be automatically set to (OFF) when the
[FACE CHASER] is set to (ON) while the [SCENE MODE] (l90)
is set to (FI REWORKS), (LANDSCAPE), or (NIGHT
SCENERY).
≥[FOCUS MODE] (l98) is set to (9-PT AUTOFOCUS) and
[METERING MODE] (l98) is set to (MULTI).
≥Face detection is disabled when using burst recording or panorama
still picture recording.
≥When [FOCUS] (l112) is set to (MANUAL), Auto focus is
disabled.
≥When it is set to [ISO] (l100) or [EXP COMPENSATION] (l106),
the brightness may not be adjusted.
≥When [FACE CHASER] is set to (ON), Slow Motion Mode (l81) is
set to off.
≥When [EXPOSURE] (l110) is set to (SHUTTER),
(APERTURE) or (MANUAL), the brightness is not adjusted.

[FACE CHASER]

[MENU]: # [FACE CHASER] # [(ON)]
3
HX-WA20
HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 102 ページ ２０１２年２月１４日　火曜日　午後５時１０分