VQT4F46 177
Recording
Problem Check points
The high
temperature
warning icon
is displayed and
recording is not
possible.
≥The battery temperature or unit internal
temperature (excluding battery) rises. Wait
for the temperature to drop before using the
unit again.
When recording
still pictures, the
angle of view of
the image
displayed on the
LCD monitor
changes.
≥The field of view of the image displayed on
the LCD monitor differs for motion pict ure
recording and still picture recording. At time
of purchase, the recording standby screen
shows video view. Press the butt on
halfway to change to photo view. To change
the angle of view of the recording standby
screen to photo view, set [PHOTO VIEW] t o
(ON). (l107)
The unit arbitrarily
stops recording.
≥Use an SD card that can be used for motion
picture recording. (l39)
≥The recordable time may have shortened
due to the deterioration of the data writing
speed or repeated recording and deletion.
Using the unit, format the SD card or built-in
memory. (l72)
Image not in focus ≥Close and then re-open the LCD monitor.
Alternatively, turn the unit off and then on
again. When [FOCUS] is set to
(MANUAL), do the above, then reconfigure
the manual focus.
There is noise in
the recording
image.
≥When the [ISO] setting is too high, noise
may appear in the recorded images. Please
lower the ISO sensitivity setting. (l100)
HX-WA20PPPCPU-VQT4F46_mst.book 177 ページ ２０１２年２月１４日　火曜日　午後５時１０分