Preparing Documents

Acceptable Documents

The acceptable documents for this scanner are as follows.
Document size:
48–216 mm
(1.9–8.5 in.)
70–2540 mm
(2.8–100 in.)
Paper thickness: 40–209 g/m² (11–55 lb.)
The height of all the documents on the tray should be less
than 7.5 mm (0.3 in.).
This compares to 75 sheets (80 g/m² or 20 lb.) of new
paper.
With the exception of ISO format cards, the minimum
guaranteed feeding length is 70 mm (2.8 in.).
Single paper feeding is recommended for papers
exceeding the legal size length.
Recommended paper: Plain paper

Acceptable cards

ISO format card:

Size: 85.6 x 54 mm (3.4 x 2.1 in.)
Thickness: 0.76 mm (0.03 in.)
Embossed card is also acceptable.
A maximum of 3 cards can be loaded on the feed tray. The height of the total cards (the total thickness including
the embossing on each card) should be less than 5 mm (0.2 in.). Additionally, the embossing on each card
must not get entangled with others.
Use the landscape orientation when scanning an embossed card. If the scanning fails, place the card upside
down, and then try again.
Use the mixed batch card guide (page 25) when scanning mixed media (cards and papers) at the same time.
16 Operating Manual
Operation