Mixed Batch Card Guide
No adjustment to the document guide is required when using the mixed batch card guide. The mixed batch
card guide prevents a card from skewing when scanning paper documents and a card simultaneously.

Installing the mixed batch card guide

Install the mixed batch card guide as shown in the following illustration.
Feed tray

Using the mixed batch card guide

Set paper documents on the feed tray, and a card on the mixed batch card guide respectively.
•The card set on the mixed batch card guide is fed after completing the paper document scanning.
•The mixed batch card guide is suitable for the following card.
ISO format card:
Size: 85.6 x 54 mm (3.4 x 2.1 in.)
Thickness: 0.76 mm (0.03 in.)
Embossed card is also available.
•Set the card horizontally.
Note
•When using the mixed batch card guide, the document guides cannot be adjusted to less than A5 size.
•Set only one card at a time.
•Make sure that the total height of the paper on the feed tray does not exceed 2 mm (0.08 in.). This is
equivalent to about 20 sheets at 80 g/m² or 20 lb.
Operating Manual 25
Care and Maintenance