Control Panel and Status Indicators

Control Panel

5
1
2
3
4
1
Hopper key (Hopper)
Adjusts the hopper position. See "Changing the Hopper Position" (page 23).
2
ADF select key (ADF)
Sets the feeding method to auto feeding [ ] or manual feeding [ ].
3
Paper thickness key (Thickness)
Changes the paper thickness mode according to the document type. See "Changing the Paper
Thickness Mode" (page 24).
4
Start/Stop key (Start/Stop)
•If you set [Wait Key] for "Manual Feed Mode"*1
in your application software, pushing this key starts
scanning.
•During scanning, pushing this key stops scanning.
16 Operating Manual
Location of Controls