Copying

Making a copy

The unit can make single or multiple copies (up to 99). Any transmittable document (p. 53) can be copied.

1

Open the document feeder tray.

 

2

Adjust the width of the document guides to the size

of the document.

 

3

Insert the document (up to 15 pages) FACE DOWN

until a single beep is heard and the unit grabs the

 

document.

 

 

Display:

 

STANDARD

 

 

 

 

Make sure the handset is on the cradle.

4

If necessary, press RESOLUTION repeatedly

to select the desired setting (p. 47).

Document guides

STOP

Document feeder tray

5

Press START/SET/COPY .

 

NUMBER=1 [100%]

 

 

6

 

 

Enter the number of copies (up to 99).

7

If necessary, choose an enlargement/reduction rate

by rotating JOG DIAL . See the next page.

8

If you want to print collated copies, press

COLLATE until the following is displayed

 

(see below).

 

 

COLLATE=ON

 

 

 

 

If you want to remove the copy document for

 

other uses, press QUICK SCAN .

 

The document will be fed into the unit and

 

scanned into memory.

9

Press START/SET/COPY .

The unit will start printing.

COPYING

QUICK SCAN

RESOLUTION

START/SET/COPY COLLATE

JOG DIAL

Note:

If a resolution is not selected, FINE resolution will be selected automatically.

You can make or receive a voice call while making copies.

After copying, the enlargement/reduction rate setting will return to “100%”.

To stop copying

Press STOP .

To eject the document, press STOP again.

Printing collated copies

The unit will print uncollated copies. You can also print collated copies. See the example below. Example: Making two copies of a 4 page original document

14

13

2 2

21

34

33

42

41

(Uncollated)(Collated)

Note:

If you turn the collating feature on, the unit will store the document into memory and print it. If memory becomes full while storing, the unit will only print out the stored pages.

After copying, the collating feature will turn off automatically.

82