35
Sending Faxes
Sending the same document to pre-programmed parties
1Insert the document FACE DOWN.
●If necessary, press or repeatedly
to select the desired resolution (p. 28).
2Press .
Display:
3Press or until the following is
displayed.
4Press .
●The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each station, calling
each number sequentially.
●
After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report
(see below).
SET
<BROADCAST>
SEND:PRESS SET
DIRECTORY[+ -]
FACE DOWN
STOP
Display
SET
Note:
●If you select the “FINE”, “SUPERFINE” or “PHOTO”
resolution, the number of pages that the unit can
transmit will decrease.
●If the document exceeds the memory capacity (p. 73),
sending will be canceled.
●If one of the stations is busy or does not answer, the
station will be skipped. All skipped stations will be
redialed up to 2 times after all of the other stations
have been called.
To cancel the broadcast setting
1. Press while the unit displays the
following message.
Display:
●The display will show the following.
2. Press .
SET
SEND CANCELED?
YES:SET/NO:STOP
@BROADCASTING
STOP
NO.
01
02
03
04
Mike
Peter
Sam
Kim
USAGE TIME
01'10
01'08
01'09
01'10
004'37
PAGES
02
02
02
02
008
OK
OK
OK
OK
START TIME
Jan. 10 2001 09:36AM
YOUR LOGO :
YOUR FAX NO. :
Jan.10 09:31AM
Jan.10 09:33AM
Jan.10 09:34AM
Jan.10 09:35AM
TOTAL
RESULT
OTHER FACSIMILE
BROADCAST REPORT
Sample of a broadcast sending report