Receiving Faxes
FAX ONLY mode!
(all calls are received as faxes)
Activating the FAX ONLY mode
1
2
Set feature #77 to “FAX ONLY” (p. 88).
Display
If the arrow (▼) is not shown on the right of the display, turn it on by pressing
AUTO ANSWER .
● The display will show the number of rings before the unit answers a call in the FAX ONLY mode.
Display: PICKUP1&1RCV1FAX
AFTER131RINGS | JOG DIAL |
|
If necessary, rotate JOG DIAL until the | AUTO ANSWER | SET |
|
| |
3 desired ring count is displayed, and press |
|
|
SET .
Display:▼
ON
●When receiving calls, the unit will automatically answer all calls and only receive fax documents.
Note:
●If the arrow (▼) is already shown on the right of the display and you wish to change the ring count, turn
the arrow off once then on again by pressing AUTO ANSWER and follow the instructions in step 3.
●This mode should not be used with a telephone line which is used for both voice and fax calls. Fax communication will be attempted even if someone is trying to call you.
If you have a telephone line just for faxes, we recommend the following setup.
Example: One telephone line is used for voice calls and a separate telephone line for faxes.
Line 1 – Voice calls
Line 2 – Fax calls
Only a fax machine is connected.
61