Automatic dialing on the main unit
Storing names and telephone numbers in the phonebook
Making a voice call using the phonebook
1 Press 
(Phonebook).
2 Press 
(Search buttons) repeatedly until the desired name is displayed.
3 Press 
(Speakerphone).
Editing a stored name or number in the phonebook
1 Press 
(Phonebook).
2 Press 
.
●“XXX” shows the remaining station numbers you can store.
●You can program up to 100 stations, including 4 pre- programmed stations.
ﾄ ｳ ﾛ ｸ ｸ ﾊ ｱ [SET] ｵ ｽ ｹ ﾝ ｻ ｸ ｸ ﾊ ｸ [ ▼▲] ｵ ｽ
ﾃ ﾞ ﾝ ﾜ ﾁ ｮ ｳ ｱ ｷ x x x ｹ ﾝ
1 Press | (Phonebook). |
2 Press | (Search buttons) repeatedly until the |
desired name is displayed.
3 Press 
.
4 Edit the name (see the table on page 9 for instructions).
●If you do not need to edit the name, skip to step 5.
3 Enter the name, up to 12 characters (see the table on page 9 for instructions).
4 Press 
.
5 Enter the telephone number, up to 24 digits.
●To correct a mistake, press 
.
6 Press 
.
7 If necessary, enter the group number
8 Press 
.
●To program other items, repeat steps 3 to 8.
9 Press | to exit the program. |
5 Press 
.
6 Enter the correct telephone number.
●If you do not need to edit the telephone number, skip to step 7.
7 Press 
.
8 If necessary, enter the correct group number.
9 Press 
.
10
