Installations and connections
Installing the ink film
1
2
Open the control panel.
Open the back cover.
Insert the orange gear into the left slot of the main unit.
3 Insert the ink film.
Insert the white gear into the right slot of the main unit.
4
5
6
When the unit runs out of ink film, the following message will be displayed.
If the ink film is slack, tighten it by winding this gear (orange).
Close the back cover pressing
“ ” down on both sides until it clicks into place.
Close the control panel.
フィルムがなくなりました U23 交換してください
品番:KX-FAN190
Install a new ink film.
Replacement ink film: | ¥714 | |||
| (15 m) | |||
(15 m X 2) | ¥ | 1,208 | ||
| (15 m) (*1) | ¥ | 893 | |
| (15 m X 2) (*1) | ¥ | 1,523 |
4
*1
・As of January 2009. | ・Tax included. |