7000 Series Telephone Features
14 E & OE
Station Programming
Station Programming allows you to
program a certain feature from your
telephone individually. You need to
switch you telephone to the station
programming mode for programming.
During programming mode, your
telephone is busy to all callers. If you
want to make a normal call handling
operation, you should exit the
programming mode.
To enter the Extension Programming
mode:
1. Set the MEMORY switch on your
telephone to “PROGRAM”.
Ÿ Make sure the handset is on the cradle
and the SP-PHONE button is off.
Flexible Button Assignment
CO and MESSAGE buttons on you
telephone can be assigned as a Direct
Station Selection (DSS, One-Touch
Dialling button, or One Touch Access for
System Features. Programmable Feature
(PF) buttons can be assigned as a One
touch Dialling button or One Touch
Access for System Features.
Direct Station Selection (DSS)
Button Assignment
Allows you to assign a flexible (CO and
MESSAGE) button as a DSS button.
1
Press CO or MESSAGE button Dial 1
Dial extension number Press STORE button
(21 through 26)
One-Touch Dialling Button
Assignment
Allows you to assign a flexible button as a
One-Touch Dialling button. Make sure to
enter line access code (9, 81, 82 or 0)
first.
To assign a CO or a MESSAGE button:
2
Press CO or MESSAGE button Dial 2
Dial phone number Press STORE button
To assign a PF button:
Press PF button Dial phone number Press STORE
button
Flexible CO button Assignment
CO buttons can be changed to another
line number.
0
Press CO button Dial 0 Dial line number
(1 or 2)
Press STORE button
To exit the programming mode:
Set the MEMORY switch to “SET”