Panasonic KX-T7720E manual Redial ordinarily Used to redial

1PROGRAM: Used to enter and exit the programming mode. (The system programming mode is available only when the main unit is a KX-TA624.)

2CONF (Conference): Used to establish a multiple party conversation.

3INTERCOM: Used to make or receive intercom calls.

4FWD/DND (Call Forwarding/Do Not Disturb): Used to perform Call Forwarding or Do Not Disturb.

5FLASH/RECALL: Used to disconnect the current call and make another call without hanging up.

6AUTO ANS (Auto Answer) (KX-T7720/7730): Used to receive an incoming call in the hands-free mode.

MUTE (KX-T7720/7730): Used to mute the microphone during a conversation.

VOICE CALL (KX-T7750): Used to monitor an intercom call automatically.

7AUTO DIAL/STORE: Used for speed dialling or storing program changes.

8TRANSFER: Used to transfer a call to another party.

9REDIAL (ordinarily): Used to redial.

10HOLD: Used to place a call on hold.

11SP-PHONE (KX-T7720/7730): Used for the handsfree operation.

MONITOR (KX-T7750): Used for handsfree dialling. You can monitor the party's voice handsfree.

12NAVIGATOR KEY (KX-T7730): Used to adjust the volume and the display contrast or select desired items for each function.

VOLUME KEY (KX-T7720/7750): Used to adjust the volume.

13Flexible Outside (CO) Line Button: Used to make or receive an outside call. Pressing this button seizes an idle outside line automatically. (Button assignment is required.) Also used as the desired function buttons. (Button assignment is required.)

14PAUSE: Used to insert a pause during dialling.

15MESSAGE: Used to leave a message waiting indication or call back the party who left the message waiting indication.

16Message/Ringer Lamp: The Message/ Ringer lamp informs you visually that you have a message or a call.

•When you receive a call, the lamp flashes depending on the ringing pattern. When someone has left you a message, the lamp is lit continuously.

•When the ringing pattern is set to Single (Slow flash), Double (Moderate flash), or Triple (Rapid flash) in your PABX, the lamp flashes. When the other ringing patterns are set in your PABX, the lamp may not flash. (e.g., S-Double, Call Waiting Tone1).

– 9 –