Panasonic KX-TC1484F operating instructions Troubleshooting, Problem Cause and Remedy

Troubleshooting“

Problem	Cause and Remedy
The unit does not work.	≥Check the settings (p. 7–9).
	≥Charge the battery fully (p. 8).
	≥Clean the charge contacts and charge
	again (p. 9).
	≥Install the battery properly (p. 8, 30).
	≥Place the handset on the base unit and
	unplug the AC adaptor to reset. Plug in,
	and try again.
An alarm tone sounds.	≥You are too far from the base unit.
	Move closer and try again.
	≥Place the handset on the base unit and
	try again.
	≥Plug in the AC adaptor.
	≥Raise the base unit antenna.
Static, sound cuts in/out,	≥Locate the handset and the base unit
fades. Interference from	away from other electrical appliances
other electrical units.	(p. 3).
	≥Move closer to the base unit.
	≥Raise the base unit antenna.
	≥Press (CH/FUNCTION) to select a clearer
	channel in the talk mode.
The handset does not ring.	≥The ringer volume is set to OFF. Set to
	ON (p. 9).
	≥If a power failure occurs, the handset
	loses communication with the base.
	When power returns, place the handset
	on the base unit once then try again.
The handset display is	≥Install the battery properly (p. 8, 30).
blank.	≥Charge the battery fully (p. 8).
You cannot program items,	≥Programming is not possible while the
such as the dialing mode.	unit is in the talk mode or when viewing
	the Caller List/phone book.
	≥Do not pause for over 60 seconds while
	programming.
	≥Move closer to the base unit.
	≥(›) or (‹) may have been pressed
	when you picked up the handset. Press
	(OFF) and try again.

Useful Information

For assistance, please call: 1-800-211-PANA(7262) 31