Panasonic KX-TDA30 user manual Customised Buttons, Programmable Feature PF, Buttons Feature

1.1 Before Operating the Telephones
RELEASE	RELEASE:	Navigator Key/Jog Dial/Volume Key:
	Used to disconnect the line.	Used to adjust the volume and the
		display contrast or select desired
		items.

VOL

	Programmable Feature (PF):		MODE:
	Located on the upper part of the CO	MODE	Used to shift the display to access
(PF)	button array or on the DSS Console.		various features.
	Assigns the desired button and used to
	access the stored feature. Mostly used
	as a One-touch Dialling button. (Only
	the "F and number" may be shown on
	some telephones.)
	SELECT:		SHIFT:
SELECT	Used to select the displayed item or to	SHIFT	Used to access the second level of Soft
	call the displayed phone number.		button features.

ENTER:	CANCEL:
Used to confirm the selected item.	Used to cancel the selected item.

Customised Buttons

If the term is in parentheses like (Account) in this section, it means a flexible button has been made into an "Account" button. To customise, refer to "3.1.3 Customising the Buttons".

Buttons	Feature
Loop-CO (L-CO)	Used to access an idle outside line for making outside calls.
	Incoming outside calls from any outside line arrive at this button.
	Used to access an idle outside line in a specified outside line group for
Group-CO (G-CO)	making outside calls.
	Incoming calls from outside lines in the assigned outside line group arrive
	at this button.

18

User Manual