![](/images/new-backgrounds/1072339/7233929x1.webp)
2.6Wall Mounting
The PBX is designed for wall mounting only. The wall where the PBX is to be mounted must be able to support the weight of the PBX. When wall mounting the main unit, use either the included screws, or screws of the same size.
2.6.1Mounting on a Wooden Wall
The included screws may be used when mounting the main unit on a wooden wall.
1.Place the template (found on the last page of this manual) on the wall to mark the 3 screw positions.
120 mm
Template
232 mm
2.Fit the washers on the screws, and drive the screws into the wall. Washer
Drive the screw to this point.
3.Affix the PBX to the screw heads.
Getting Started
15