TG1611SA(e).book Page 17 Monday, April 4, 2011 9:08 AM
Programming
Special programming
Alarm
An alarm sounds at the set time (once or daily) for 2 minutes. You can also customise the repeat times and the repeat cycle (snooze function). Alarm can be set for each handset.
Example: If you want the alarm to sound 3 times, repeating at 5 minute intervals from 7:00, you need to set the alarm as follows; Time: “07:00”
“Repeat Times”: “3 Times”
“Repeat Cycle”: “5 Minutes”
Important:
LSet the date and time beforehand (page 10).
1{j/OK}
2{r}: “Set Time” s{j/OK}
3{r}: “Alarm” s{j/OK}
4{r}: “Alarm Mode” s{j/OK}
5{r}: Select the desired alarm option. s
{j/OK}
“Off”
Turns alarm off. Go to step 15.
“Once”
An alarm sounds once at the set time.
“Daily”
An alarm sounds daily at the set time.
6Set the desired time. s{j/OK}
7{r}: “Repeat Times” s{j/OK}
8{r}: Select the desired setting. s
{j/OK}
L If you only want the alarm to sound 1 time, select “Off” and go to step 11.
9{r}: “Repeat Cycle” s{j/OK}
10{r}: Select the desired setting. s
{j/OK}
11{r}: “Ringtone” s{j/OK}
12{r}: Select the desired alarm tone. s
{j/OK}
LWe recommend selecting a different ringer tone from the one used for outside calls.
13{r}: “Volume” s{j/OK}
14{r}: Select the desired volume. s
{j/OK}
15{ic}
Note:
LPress {ic} to stop the alarm completely.
L Press any dial key from zto 9, *, or y to stop the sound but keep the set time and/or the snooze function activated.
L When the handset is in use, the alarm will not sound until the handset is in standby mode.
17
