Panasonic KX-TG1810AL, KX-TG1822AL Sending a message, Writing and sending a new message

TG1810_1822AL(e-e).book Page 42 Tuesday, March 1, 2005 6:46 PM

SMS (Short Message Service)

– Message Centre 2: 01983391

Message Centre 1 is used for sending SMS messages, and Message Centre 2 is used for receiving messages.

LConsult your service provider for more information.

1Press {j/OK}.

2Select “SMS”, then press {>}.

3Select “Public”, then press {>}.

4Select “Settings”, then press {>}.

5Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page

36).

6Select “Message Centre1” or

“Message Centre2”, then press {>}.

7Edit the number as necessary, then press {j/OK}.

8Select “Save”, then press {>}.

9Press {ih}.

Note:

LIf your phone is connected to a PBX, you need to add the PBX line access number and a dialling pause to the beginning of the Message Centre 1 phone number.

Sending a message

Writing and sending a new message

1Press {j/OK}.

2Select “SMS”, then press {>}.

3To access the public mailbox Select “Public”, then press {>}.

To access a private mailbox

Select the desired mailbox, press {>}, then enter its password.

4Select “Create”, then press {>}.

LIf “^Use Last Text?” is displayed, you can use the text from the last message you created by pressing {e}. This message will be displayed only if the last message was created using the same mailbox you selected in step 3.

5Enter the message (page 47), then press {j/OK}.

6Enter the destination phone number (20 digits max.), then press {j/OK}.

LTo send the message to a party saved in the handset phonebook, press {k}, select the handset phonebook entry, then press {j/OK} 2 times.

LTo send the message to a party logged in the caller list, press {e} or {v} repeatedly to select the party, then press {j/OK} 2 times.

LTo send the message to a phone number logged in the redial list, press {R} repeatedly to select the phone number, then press {j/OK} 2 times.

LIf you wish to send the message to the other party’s mailbox, enter the other party’s mailbox number after the destination phone number.

Example: The other party’s phone number is 123456 and their mailbox number is 1.

Enter 1234561.

If you do not enter the other party’s mailbox number, the message will be sent to the public mailbox.

7To save the message, select “Yes”, then press {>}.

LTo send the message without saving it, select “No”, then press {>}.

8To send the message, select “Send”, then press {>}.

LTo cancel sending, press {ih}.

Note:

LThis unit supports SMS messages of up to 612 characters, however, the maximum

42