SMS (Short Message Service)
number of characters you can send or receive may be limited by your SMS service provider. Consult your SMS service provider for details.
LIf your message contains over 160 characters, “@@Long Message@@” is displayed. Your service provider may treat long messages differently from other messages. Consult your service provider for details.
L“Invalid Number” is displayed if you try to send a message to a phone number saved in the handset phonebook, caller list, or redial list that is over 20 digits long.
LWhen sending a message, “Sending Message” is displayed momentarily, then “Transferring Message” is displayed.
LIf your phone is connected to a PBX, store the PBX line access number (page 46).
Sending a saved message
1Press {j/OK}.
2Select “SMS”, then press {>}.
3To access the public mailbox Select “Public”, then press {>}.
To access a private mailbox
Select the desired mailbox, press {>}, then enter its password.
4Select “Send List”, then press {>}.
5To read a saved message, press {e} or {v} repeatedly to select the message, then press {j/OK}.
LMessages are displayed in chronological order and by destination phone number.
6To send the message, press {j/OK}, select “Send”, then press {>}.
7Press and hold {C/T} to erase all numbers, then continue from step 6, “Writing and sending a new message”, page 42.
Editing and sending a saved message
1Press {j/OK}.
2Select “SMS”, then press {>}.
3To access the public mailbox Select “Public”, then press {>}.
To access a private mailbox
Select the desired mailbox, press {>}, then enter its password.
4Select “Send List”, then press {>}.
5Press {e} or {v} repeatedly to select the message, then press {j/OK}.
6Press {j/OK}, select “Edit Message”, press {>}, then continue from step 5, “Writing and sending a new message”, page 42.
Erasing saved messages
1Press {j/OK}.
2Select “SMS”, then press {>}.
3To access the public mailbox Select “Public”, then press {>}.
To access a private mailbox
Select the desired mailbox, press {>}, then enter its password.
4Select “Send List”, then press {>}.
5Press {e} or {v} repeatedly to select the message, then press {j/OK}.
6Press {j/OK}, select “Erase”, then press {>}.
LTo erase all messages in the selected mailbox, select “Erase All”, then press {>}.
7Select “Yes”, then press {>}.
8Press {ih}.
Receiving a message
When an SMS message is received:
43
