Panasonic KX-TG1855AL Base unit settings, To customise the base unit using the handset

Base Unit Settings

Base unit settings

To customise the base unit using the handset:

1{j/OK}

2Press {^} or {V} to select “Base Unit Setup”. i {>}

3Press {^} or {V} to select the desired item in the base unit settings menu. i

{>}

4Press {^} or {V} to select the desired item in the sub-menu. i {>}

5Press {^} or {V} to select the desired setting then press {>}.

L This step may vary depending on the feature being programmed. L To exit the operation, press {ih}.

Note:

L The current item or setting is indicated by > on the display.

Menu	Sub-menu	Details (default setting)
Ringer Volume	—	For base unit (Medium)
Call Options	Recall/Flash	Recall time (“100 msec.”)*1
	Area Code	page 22
Other Options	Base Unit PIN	Change base unit PIN (“0000”).*2
		–	Enter the current 4-digit base unit
			PIN.*3
		–	Enter the new 4-digit base unit
			PIN. i {>} i {ih}
	Repeater Mode	(“Off”): page 32

*1 Change the recall time, if necessary, depending on the requirements of your service provider/telephone company or PBX.

The recall time depends on your telephone exchange or host PBX. Consult your PBX supplier if necessary.

You can access your service provider/telephone company “Call Waiting” service by having the recall time set at 100 ms, and then follow your service provider/telephone company “Call Waiting” instructions to operate this service.

*2 If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you.

*3 If you forget your PIN, consult your nearest Panasonic service centre.

21