L To cancel a selected handset number, press the number again. The number will stop flashing.
6{^}/{V}: “Yes” i {>}
L A long beep will sound as each
handset number disappears.
L The handset does not beep when cancelling its own registration.
7{ih}
Increasing the range of the base unit
You can increase the signal range of the base unit by using a DECT repeater. Please use only the Panasonic DECT repeater noted on page 4. Consult your Panasonic dealer for details.
Important:
L Before registering the repeater to this base unit, you must turn the repeater mode on.
L Do not use more than one repeater at a time.
Setting the repeater mode
1{j/OK}
2{^}/{V}: “Base Unit Setup” i
{>}
3{^}/{V}: “Other Options” i
{>}
4{^}/{V}: “Repeater Mode” i
{>}
5{^}/{V}: “On” or “Off” i{>} i {ih}
Note:
L After turning repeater mode on or off, w will flash on the handset momentarily. This is normal. The handset can be used once w stops flashing.
Intercom between handsets
Intercom calls can be made between handsets.
Example: When handset 1 calls handset 2
1Handset 1:
{INT} i Press {2} (desired handset number).
2Handset 2:
{C}
3When finished talking, press
{ih}.
Transferring calls between handsets
Outside calls can be transferred between 2 people.
Example: When handset 1 transfers a call to handset 2
1Handset 1:
During an outside call, press {INT}. i Press {2} (desired handset number).
L The outside call will be put on hold.
L If there is no answer, press {INT} to return to the outside call.
2Handset 2:
Press {C} to answer the page. L Handset 2 can talk with handset
1.
3Handset 1:
To complete the call transfer, press
{ih}.
32
