TG1861AL(e)_QG.fm Page 5 Wednesday, March 29, 2006 4:27 PM
Battery charge
Question |
| Cause & solution |
How do I charge the battery? |
| LMake sure that the battery is properly installed in the |
|
| handset and the cover is closed. Place the handset on |
|
| the base unit or charger. Confirm iand battery |
|
| strength icon (e.g. 7Low, 6Medium, 5 |
|
| High) are alternately shown on the display. |
|
| LIt takes approx. 7 hours to charge the empty battery. |
|
| When it is fully charged, 5remains on the display. |
|
| This will change depending on battery charge. |
|
| |
Can I leave the handset on the | LYou can place the handset on the base unit or charger | |
base unit or charger after battery |
| anytime. Battery is not overcharged and there is no |
is fully charged or each call is |
| damage to the battery. By placing the handset on the |
finished? |
| base unit or charger, it is always fully charged. |
|
|
|
Where can I buy new battery? |
| LBattery can be purchased through your local retailer. |
|
|
|
Range/Distance (No link to base) |
| |
Question | Cause & solution |
What is the range/distance of my | LRange/distance is related to technology and |
cordless phone? (Why am I | enviromental factors. Therefore we cannot provide a |
getting short or poor range/ | given range or distance. |
distance on my cordless phone?) | LMake sure that the AC adaptor is properly connected |
Why is w flashing? | to wall socket and to the base unit and that beep tones |
| sound when you press {x} on the base unit. |
| LMove closer to the base unit (Allow up to 60 seconds |
| for the handset to reassign to the base unit.). |
| LIf you try manual registration process, allow up to 60 |
| seconds for the handset to reassign to the base unit. |
| LIf the above remedies do not solve the problem, refer |
| to the troubleshooting section in your Operating |
| Instructions for more information. |
|
|
– 5 –
