48
Voice mail service is an electronic on-line answering system offered by
your telephone company. After subscribing, the voice mail system can
answer calls automatically for you when your line is busy or if calls are not
answered, and caller can leave their messages at the voice mail box
virtually located at the telephone company. After the voice mail box has
received messages, the unit will indicate it in two ways:
(a) Voicemail displayed on the handset, and (b) the VM indicator on
the base unit will ash.
To use this feature, you must rst store your access number.

Storing a Voice Mail Access Number

Make sure the unit is not being used and the handset is lifted off the
base unit.
1Press (FUNCTION).
2Scroll to Program by pressing Öor Ñ.
3Press á.
4Scroll to Save mailbox# by pressing Ö
or Ñ.
5Press á.
6Enter your access number, up to 32 digits.
You may enter pauses*(see page 49).
Each time you press (CLEAR), a digit is
erased. To erase all digits, press and hold
(CLEAR).
1234567PPP890
IH G
=Next
1234567PPP890
F
=Edit
H
=Save
Set flash time
H
Save mailbox#
Voicemail tone
Ringer pattern
H
Program
--------------

Voice Mail Service

8Press á(Save key).
A beep sounds.
To exit the programming mode, press (OFF).
You can exit the programming mode any time by pressing (OFF).
To erase a stored number
Repeat steps 1 through 5 \Press and hold (CLEAR) until all of the digits
are erased \Ö(Next key) \á(Save key).
A beep sounds.
7Press Ö(Next key).
If you want to edit the entered number, press
Ñ(Edit key) and return to step 6.
1234567PPP890
Save mailbox#