One-Touch Dialler
4
4-A
Storing a Phone Number in the DIRECT Button
You can store a phone number in the (DIRECT)button. The stored number
is dialled with a one-touch operation.
The TALK indicator light must be off before programming.
•If a pause is required for dialling,
press (PAUSE) where needed.
Pressing (PAUSE) counts as one digit
(5-C).
Section 4
1
Press PROGRAM á.
•The TALK indicator flashes.
2
Enter a phone number up to
22 digits.
•If you misdial, press PROGRAM á,
and start again from step 1.
3
Press (DIRECT).
•A beep sounds.
TALK Indicator
(TALK)
PROGRAM ,
AUTO
(DIRECT)
4-B
Dialling a Stored Number in the DIRECT Button
Press (TALK) \(DIRECT).
To erase a stored number: press PROGRAM á\AUTO Ü\(DIRECT).
Section 5
Special Features
5-C How to Use the PAUSE Button
(For Analog PBX Line/Long Distance Service Users)
We recommend you press (PAUSE) if a pause is required for dialling with
a PBX or to access a long distance service.
Ex: Line access number (9) (PBX)
(9) \(PAUSE) \
•Pressing (PAUSE) once creates a 3.5 second pause. This prevents
misdialling when you redial or dial a stored number.
•Pressing (PAUSE) more than once increases the length of the pause
between numbers.
5-D Handset Locator
You can locate the handset or page the handset.
1
Press (HANDSETÒLOCATOR) on the base unit.
•The IN USE/CHARGE indicator flashes and the handset beeps for 1
minute.
2
To stop paging, press (HANDSETÒLOCATOR)again or press (TALK)
twice on the handset.
Phone number
Whenever you place the handset on the base unit, the unit automatically
selects one of more than a million security codes. These codes help prevent
the unauthorized use of your telephone line by another cordless telephone
user.