Things You Should Know
6

6-C Base Unit Location/Noise

Recharge

When the RECHARGE indicator flashes or the
unit beeps intermittently, place the handset on
the base unit to recharge the battery for 6 hours.
•If you DO NOT recharge the handset battery
for more than 15 minutes, the RECHARGE
indicator will continue to flash.
Note:
While using the handset:
— If you are near a microwave oven which is being used, noise may
be heard at the receiver. Move away from the microwave oven
and closer to the base unit.
— If more than one cordless phone is being used and your handset
is near another cordless phone’s base unit, noise may be heard.
Move away from the other cordless phone’s base unit and closer
to your base unit.

6-A Battery

Calls are transmitted between the base unit and the handset using wireless
radio waves. For maximum distance and noise free operation, the
recommended base unit location is:
RECHARGE
Indicator
In a HIGH and CENTRAL location
with no obstructions such as walls.
Away from electrical appliances
such as a TV, personal computer
or another cordless phone.
Raise
the antennas.
*Within about 10 feet (3 m)
•Battery life may vary depending on usage conditions and ambient
temperature.
•Clean the handset and the base unit charge contacts with a soft dry
cloth once a month. Clean more often if the unit is subject to grease,
dust or high humidity. Otherwise, the battery may not charge properly.
•If the battery is fully charged, you do not have to place the handset on the
base unit until the RECHARGE indicator flashes. This will maximise the
battery life.
•The battery cannot be overcharged.

Battery information

After your Panasonic battery is fully charged:

6-B Battery Replacement

If the RECHARGE indicator flashes after being fully charged, replace the
battery with a new Panasonic P-P510 (N4HKGMB00001) battery.
1
Carefully insert a flat
metal object in the slot,
and push forward to
release the lock. Remove
the cover.
2
Replace the battery.
Place the battery leads
inside the groove,
otherwise the leads may
be damaged when closing
the cover.
3
Close the cover.
Make sure to charge the
new battery for 6 hours.
Push
forward.
1
2

6-D Adding Another Phone

This unit will not function during a power failure. To connect a standard
telephone on the same line, use a telephone double adaptor (for Australia)
or a T-adaptor (for New Zealand).
Telephone
Line Cord
Standard Telephone
To
Socket
(Optional)
Telephone
Double Adaptor
Standard
Telephone
Telephone Line Cord
T-Adaptor
(Optional)
To Single-Line
Telephone Jack
For Australia
For New Zealand
Up to 11 days
While not in use (Standby)
Up to 4.5 hours
While in use
(TALK)
Operation
away from the base unit
near the base unit*
Up to 3.5 hours
Approx. battery life