Panasonic KX-TG5821AL, KX-TG5822AL Making/answering calls, Intercom, Phonebook

Useful Information

Making/answering calls, Intercom

Problem	Cause & solution
Static is heard, sound	L Move the handset and the base unit away from other
cuts in and out.	electrical appliances.
Interference from other	L Move closer to the base unit.
electrical units.	L Raise the base unit antennas.
	L Turn on the clarity booster feature (page 19).
	L If your unit is connected to a telephone line with ADSL
	service, we recommend connecting a noise filter
	between the base unit and the telephone line jack.
	Contact your ADSL provider for details.
The handset does not	L The ringer volume is turned off. Adjust it (page 31).
ring.
I cannot make a call.	L If the other handset is in use, you may not be able to
	make a call. Try again later.
	L Dial lock is turned on. To turn it off, see page 35.
	L If the above remedies do not solve the problem, set the
	dialling mode. Press {MENU} {0} {5} {1} {Save}
	{OFF}.
	L The unit is not designed to be used with rotary (pulse
	dialling) services.
I cannot redial by	L If the last number dialled was more than 48 digits long,
pressing {REDIAL}.	the number will not be redialled correctly.
	L If you press {REDIAL} after you have started dialling,
	this button functions as the {PAUSE} button. To redial,
	do not dial any numbers before pressing {REDIAL}.
	L Dial lock is turned on. To turn it off, see page 35.
I cannot have a	L Make sure that an optional headset is connected
conversation using the	properly (page 39).
headset.	L If “SP-phone” is displayed on the handset, press {C}
	to switch to the headset.
	L Use only Panasonic KX-TCA88AL headset.
I cannot page the	L The called handset is too far from the base unit.
handset.	L The called handset is in use. Try again later.

Phonebook

Problem	Cause & solution
I cannot store an item in	L You cannot store an item in the phonebook while the
the phonebook.	handset is in talk, speakerphone, or intercom mode.
	L Do not pause for over 1 minute while storing.
	L Dial lock is turned on. To turn it off, see page 35.

46