![](/images/new-backgrounds/1210990/21099071x1.webp)
Programmable Settings
Re-registering the handset
If “No link to base. Move closer to base, try again.” is displayed even when the handset is near the base unit, you may need to
Important:
L Make sure the base unit is not being used.
L Have the handset and base unit near each other when
L
Confirm the extension number of the handset which has lost the communication by placing the handset on the base unit or charger.
If you
1 Handset:
Press {MENU}.
2 Scroll to “Initial setting” by pressing {V} or {^}, then press {>}.
3 Scroll to “Registration” by pressing {V} or {^}, then press {>}.
4
Press and hold the handset locator button that corresponds to the handset you want to
L After the CHARGE indicator starts flashing, the rest of the procedure must be completed within 1 minute.
5 Handset:
Press {OK}, then wait until the handset beeps.
L Registration is complete.
36