Panasonic KX-TG7202HK, KX-TG7200HK Intercom between handsets, Transferring calls between handsets

Multi-unit Operation

L To cancel a selected handset number, press the number again. The number will stop flashing.

6{^}/{V}: “Yes” i{>}

L A long beep will sound as each

handset number disappears.

L The handset does not beep when cancelling its own registration.

7{ih}

Increasing the range of the base unit

You can increase the signal range of the base unit by using a DECT repeater. Please use only the Panasonic DECT repeater noted on page 4. Consult your Panasonic dealer for details.

Important:

L Before registering the repeater to this base unit, you must turn the repeater mode on.

L Do not use more than one repeater at a time.

Setting the repeater mode

1{j/OK}

2{^}/{V}: “Base Unit Setup” i

{>}

3{^}/{V}: “Other Options” i

{>}

4{^}/{V}: “Repeater Mode” i

{>}

5{^}/{V}: “On” or “Off” i{>} i {ih}

Note:

L After turning repeater mode on or off, w will flash on the handset momentarily. This is normal. The handset can be used once w stops flashing.

Intercom between handsets

Intercom calls can be made between handsets.

Example: When handset 1 calls handset 2

1Handset 1:

{INT} iPress {2} (desired handset number).

2Handset 2:

{C}

3When finished talking, press

{ih}.

Transferring calls between handsets

Outside calls can be transferred between 2 people.

Example: When handset 1 transfers a call to handset 2

1Handset 1:

During an outside call, press {INT}. iPress {2} (desired handset number).

L The outside call will be put on hold.

L If there is no answer, press {INT} to return to the outside call.

2Handset 2:

Press {C} to answer the page. L Handset 2 can talk with handset

1.

3Handset 1:

To complete the call transfer, press

{ih}.

22