Panasonic KX-TG7200HK Turning the power on/off, Setting up the unit before use, Display language

Preparation

Battery level

Battery icon Battery level

5High

6Medium

7Low

L When flashing: Needs to be charged.

Panasonic Ni-MH battery performance (supplied batteries)

Operation	Operating
	time
In continuous use	17 hours max.
In continuous	180 hours
standby mode	max.

Note:

L It is normal for batteries not to reach full capacity at the initial charge. Maximum battery performance is reached after a few complete cycles of charge/discharge (use).

L To maximize battery life, it is recommended that the handset batteries be fully discharged (used) until 7flashes once every few months.

L Actual battery performance depends on a combination of how often the handset is in use and how often it is not in use (standby).

L The battery level may not be displayed correctly after you replace the batteries. In this case, place the handset on the base unit or charger and let it charge for at least 7 hours.

Turning the power on/off

Power on

Press {ih} for about 1 second.

Power off

Press {ih} for about 2 seconds.

Setting up the unit before use

Display language

1{ih} i{j/OK}

2Press {^} or {V} to select “Handset Setup”. i{>}

3Press {^} or {V} to select “Display Setup”. i{>}

4Press {^} or {V} to select “Select Language”. i{>}

5Press {^} or {V} to select the desired language. i{>} i

{ih}

Note:

L If you select a language you cannot read: {ih} i{j/OK} i{^} 3 times i{>} i{V} 2 times i {>} 2 times i{^}/{V}: Select the desired language. i{>} i

{ih}

11