TG7511_7521BX(e).book Page 28 Tuesday, June 15, 2010 2:10 PM
Programming
Note:
LTo correct a digit, press {<} or {>} to move the cursor to the digit, then make the correction.
Changing the start and end time
11i{#}{2}{3}{7}
2Continue from step 3, “Turning night mode on/off”, page 27.
Setting the ring delay
This setting allows the handset to ring during night mode if the caller waits long enough. After the selected amount of time passes, the handset rings. If you select “No Ringing”, the handset never rings during night mode.
11i{#}{2}{3}{9}
2{V}/{^}: Select the desired setting. iMi{ic}
Note:
L When the answering system answers the call, this feature does not work.
Selecting categories to bypass night mode
11i{#}{2}{4}{1}
2{V}/{^}: Select your desired categories. it
L “Q” is displayed next to the selected category numbers.
L To cancel a selected category, press tagain. “Q” disappears.
3Mi{ic}
Note:
L You can also select the categories in step 2 as follows:
Press {1} to {9}. iM
Changing the handset name
Each handset can be given a customised name (“Bob”, “Kitchen”, etc.). You can also select whether or not the handset name is displayed in standby mode. The default setting is “Off”. If you select “On” without entering any handset name, “Handset 1” to “Handset 6” is displayed.
11i{#}{1}{0}{4}
2Enter the desired name (max. 10 characters; page 44).
L If not required, go to step 3.
3M
4{V}/{^}: Select the desired setting. iM2 times
5{ic}
Storing an area code to be deleted automatically
In some situations, phone numbers stored automatically in the caller list (page 33) will include area codes. If you do not want to dial the area code when making calls from the caller list, you can store the area code which you want the unit to delete automatically.
Example: You have stored the area code “123”. If you make a call from the caller list to the phone number
11i{#}{2}{5}{5}
2Enter an area code (5 digits max.). iMi{ic}
Incoming call barring (Caller ID subscribers only)
This feature allows the unit to reject calls from specified phone numbers that you do not want to answer such as junk calls. When a call is received, the unit does not ring while the caller is being identified. If
28