1{MENU} i{#}{2}{3}{8}
2{V}/{^}: Select “On” or “Off”. i{SAVE} LIf you select “Off”, press {OFF} to exit.
3Enter the desired hour and minute you wish to start this feature.
4{AM/PM}: Select “AM” or “PM”. i{OK}
5Enter the desired hour and minute you wish to end this feature.
6{AM/PM}: Select “AM” or “PM”. i{SAVE} i{OFF} LWhen the silent mode is set, & is displayed.
NChanging the start and end time
{MENU} i{#}{2}{3}{7} iContinue from step 3.
Voice mail service: Storing the voice mail (VM) access number
Once you have stored your service provider/telephone company’s voice mail access number, you can dial it automatically to listen to your voice mail messages. You need to store the voice mail access number to activate the message alert feature (page 13) for voice mail service.
1{MENU} i{#}{3}{3}{1}
2Enter your access number (24 digits max.).
3{SAVE} i{OFF}
Note:
LWhen storing your voice mail access number and your mailbox password, press {PAUSE} to add pauses between the access number and the password as necessary. Contact your service provider/ telephone company for the required pause time.
LTo erase the voice mail access number: Press and hold {CLEAR} until all digits are erased in step 2. i{SAVE} i{OFF}
Voice mail service: Voice mail (VM) tone detection
Your service provider/telephone company sends special signals (sometimes called “voice mail tones” or “stutter tones”) to the unit to let you know you have new voice mail messages after you press {C}. Soon after you hang up a call or after the phone stops ringing, your unit checks the phone line to see if new voice mail messages have been recorded. The default setting is “On”. Turn this feature off when:
– You do not subscribe to voice mail service.
16For assistance, please visit http://www.panasonic.com/help
