Registering a handset to the base unit
1Base unit:
Press and hold {ALL} for about 4 seconds until the STATUS indicator flashes in red.
NKX-TGP550 series
Press and hold {ALL} for about 4 seconds until the registration tone sounds and the STATUS indicator flashes in red.
LIf all registered handsets start ringing, press the same button to stop. Then repeat this step.
LThe next step must be completed within 90 seconds.
2Handset:
{OKL}
3Wait until “Enter Base PIN” is displayed. iEnter the base unit PIN (default: “0000”). iPress {OK}, then wait until a long beep sounds.
LIf you forget your PIN, contact your phone system dealer.
Note:
LIf an error tone sounds, or if _ is still displayed, register the handset according to the registering section of the base unit’s User Guide on the Panasonic Web site. See page 1 for Panasonic URL.
– 4 –
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
