Configuration of This Manual
This LSI application note is consists of the following sections.
Chapter 1 Overview
This chapter describes the overview of this application note.
Chapter 2 Startup Program
This chapter describes a startup process necessary for executing a program.
Chapter 3 Register Setup of Each Function
This chapter describes the setting method and setting examples of registers having
MN101C49LSI function.
Chapter 4 Sample Program 1
This chapter describes sample programs for using each peripheral device referring to sample
circuits.
Chapter 5 Sample Program 2
This chapter provides an explanation of a startup process necessary before executing a sample
program in "5.1 Startup", and an explanation of sample programs utilizing basic functions of
this LSI in "5.2 Sample Program Using Timer Function" and "5.3 Sample Program Using
Serial Function". Each sample program is described following the sections below.
(1) Program operation and display
(2) Function used
(3) State transition diagram
(4) Software
Chapter 6 Appendix 1
This chapter provides a circuit diagram operated in "Chapter 3 Register Setup of Each
Function" and "Chapter 4 Sample Program 1" and supplementary explanations.
Chapter 7 Appendix 2
This chapter describes a sample program file organization and directory block diagram of
"Chapter 5 Sampler Program 2", and Makefile.