examine your oven
Unpack oven, remove all packing material and examine the oven for any damage such as dents, broken door latches or cracks in the door. Notify dealer immediately if oven is damaged. DO NOT install if oven is damaged.
placement of oven
1.The oven must be placed on a flat, stable surface. Place the front surface of the door three inches or more from the counter top edge to avoid accidental tipping of the microwave oven during normal use. For proper operation, the oven must have sufficient air flow. Allow
(a)Do noT block air vents. If they are blocked during operation, the oven may be overheated and damaged.
(b)Do noT place oven near a hot, damp surface such as a gas or electric range, or dishwasher.
(c)Do noT operate oven when room humidity is excessive.
2.This oven is manufactured for household use only. It is not intended for built- in operation and is not approved or tested for mobile vehicle, marine, or com- mercial use.
Installation
1.Do noT block air vents. If they are blocked during operation, the oven may overheat. If the oven overheats, a thermal safety device will turn the oven off. The oven will remain inoperable until it has cooled.
WaRninG
Improper uSe of The grounDIng pLug can reSuLT In a rISK of eLecTrIc ShocK.
Consult a qualified electrician or service person if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded. If it is necessary to use an extension cord, use only a three wire extension cord that has a three prong polarized grounding plug, and a three slot receptacle that will accept the plug on the appliance. The marked rating of the extension cord should be equal to or greater than the electrical rating of the appliance.
grounding Instructions
ThIS appLIance muST be grounDeD. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.
•plug into properly installed and grounded 3 prong outlet.
•Do noT remove ground prong.
•Do noT use an adapter.
4