Panasonic NV-DS30A, NV-DS50A Using the Viewfinder/LCD Monitor

13
Using the Viewfinder/LCD Monitor
ªUsing the Viewfinder
Before using the Viewfinder, adjust the field of view so that the
displays inside the Viewfinder become clear and easy to read.
1Tilt the Viewfinder upward.
2Adjust by sliding the Eyepiece Corrector Knob 1.
ªUsing the LCD Monitor
With the LCD Monitor open, you can also record the picture while
watching it.
1
11
1Press the [PUSH OPEN] Button and, at the same
time, bring the LCD Monitor out about 90o in the
direction of the arrow.
≥The Viewfinder goes off.
2
22
2Adjust the LCD Monitor angle according to the
desired recording angle.
≥The LCD Monitor can rotate a maximum of 180o 2 from the
vertical position to the upward direction and a maximum of
90o 3 to the downward direction. Forcefully rotating the LCD
Monitor beyond these ranges will damage the Movie Camera.
Closing the LCD Monitor
Push the LCD Monitor until it is securely locked.
ªAdjusting Brightness and Colour Level
When [LCD/EVF SETUP] on the [CAMERA FUNCTIONS] or [VCR
FUNCTIONS] Main-Menu is selected, the following items are
displayed. (l 14)
LCD Brightness [LCD BRIGHTNESS]
It adjusts the brightness of the image on the LCD screen.
LCD Colour Level [LCD COLOUR]
It adjusts the colour saturation of the image on the LCD screen.
Brightness of the Viewfinder [EVF BRIGHTNESS]
It adjusts the brightness of the image in the Viewfinder.
To Adjust
Press the [PUSH] Dial and select the item to be adjusted, and then
turn the [PUSH] Dial to raise or lower the number of vertical bars in
the Bar Indication.
≥A larger number of vertical bars indicates stronger brightness or
colour saturation.
≥For other notes concerning this item, see page 53.
12:30:45
15.10.2002
12:30:45
15.10.2002
12:30:45
15.10.2002
12:30:45
15.10.2002
23
180x90x
PRESS MENU TO RETURN
LCD/EVF SETUP
LCD BRIGHTNESS
[-]||||----[+]
LCD COLOUR
[-]||||----[+]
EVF BRIGHTNESS
[-]||||----[+]
1
21
PUSH
OPEN