Panasonic P2HDXAG-HPX500 Using P2 Cards, Basic thumbnail operations, Playing back selected file

P 2 H D XA G - H P X 5 0 0

8 Using P2 Cards

PRACTICAL GUIDEBOOK

Using P2 Cards

Recorded images can be checked on the AG-HPX500's

LCD monitor as thumbnails of each file.

Basic thumbnail operations

Select MCR mode

by pressing mode button.

Press MENU button to display thumbnail menu. (MENU buttons are located under inside of LCD and front side of the camera.)

Use the or button to select a thumbnail. (The yellow frame indicates the selected thumbnail.)

Playing back selected file

Select the thumbnail you want to play and press thebutton.

Note) You need to set the same recording format as the clip you

want to play.

Select Slot

Follow the procedure below to select which of the four P2 card slots on the AG-HPX500 will be used for playback.

Press the MENU button on the thumbnail screen.

In the menu, press the		or	button to select
THUMBNAIL	and then press the			button.
Then, from the same menu, press the					or	button to select
SHOT CLIPS	and select the slot you want to use.

17